Plain weave: This is the most commonly used weave type. Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter.

Standard mesh counts per inch for stainless steel wire mesh, plain woven: 2mesh/3mesh/4mesh/5mesh/6mesh/8mesh/10mesh/12mesh/14mesh/16mesh/18mesh/20mesh/26mesh/
30mesh/40mesh/50mesh/60mesh/70mesh/80mesh/90mesh/100mesh/120mesh/150mesh/160mesh/
180mesh/200mesh/250mesh/ 300mesh/325mesh/350mesh/400mesh/

Stainless Steel Woven Wire Mesh (Plain Weave)
mesh/inch	wire diameter (mm)	aperture (mm)		mesh/inch	wire diameter (mm)	aperture (mm)	material
2mesh	1.8	10.9		60mesh	0.15	0.273	304, 304L, 316, 316L
3mesh	1.6	6.866		70mesh	0.14	0.223
4mesh	1.2	5.15		80mesh	0.12	0.198
5mesh	0.91	4.17		90mesh	0.11	0.172
6mesh	0.8	3.433		100mesh	0.1	0.154
8mesh	0.6	2.575		120mesh	0.08	0.132
10mesh	0.55	1.99		140mesh	0.07	0.111
12mesh	0.5	1.616		150mesh	0.065	0.104
14mesh	0.45	1.362		160mesh	0.065	0.094
16mesh	0.4	1.188		180mesh	0.053	0.088
18mesh	0.35	1.06		200mesh	0.053	0.074
20mesh	0.3	0.97		250mesh	0.04	0.061
26mesh	0.28	0.696		300mesh	0.035	0.049
30mesh	0.25	0.596		325mesh	0.03	0.048
40mesh	0.21	0.425		350mesh	0.03	0.042
50mesh	0.19	0.318		400mesh	0.025	0.0385

width available: up to 3.1M
Length available: 30M/100Feet